E-text prepared by Chris Curnow, Miranda van de Heijning, Joseph Cooper,
and the Project Gutenberg Online Distributed Proofreading Team
(http://www.pgdp.net)

[Pg 185]

Contributions from

The Museum of History and Technology:

Paper 11

Why Bewick Succeeded: A Note in the History of Wood Engraving

Jacob Kainen

[Pg 186]

WHY BEWICK SUCCEEDED:

By Jacob Kainen

A Note in the History of Wood Engraving

Thomas Bewick has been acclaimed as the pioneer of modern wood engraving whose genius brought this popular medium to prominence. This study shows that certain technological developments prepared a path for Bewick and helped give his work its unique character.

The Author: Jacob Kainen is curator of graphic arts, Museum of History and Technology, in the Smithsonian Institution's United States National Museum.

No other artist has approached Thomas Bewick (1753-1828) as the chronicler of English rustic life. The little wood engravings which he turned out in such great number were records of typical scenes and episodes, but the artist could also give them social and moral overtones. Such an approach has attracted numerous admirers who have held him in esteem as an undoubted homespun genius. The fact that he had no formal training as a wood engraver, and actually never had a lesson in drawing, made his native inspiration seem all the more authentic.

The Contemporary View of Bewick

After 1790, when his A general history of quadrupeds appeared with its vivid animals and its humorous and mordant tailpiece vignettes, he was hailed in terms that have hardly been matched for adulation. Certainly no mere book illustrator ever received equal acclaim. He was pronounced a great artist, a great man, an outstanding moralist and reformer, and the master of a new pictorial method. This flood of eulogy rose increasingly during his lifetime and continued throughout the remainder of the 19th century. It came from literary men and women who saw him as the artist of the common man; from the pious who recognized him as a commentator on the vanities and hardships of life (but who sometimes deplored the frankness of his subjects); from bibliophiles who welcomed him as a revolutionary illustrator; and from fellow wood engravers for whom he was the indispensable trail blazer.

During the initial wave of Bewick appreciation, the usually sober Wordsworth wrote in the 1805 edition of Lyrical ballads:[1]

O now that the genius of Bewick were mine,
And the skill which he learned on the banks of the Tyne!
Then the Muses might deal with me just as they chose,
For I'd take my last leave both of verse and of prose.
What feats would I work with my magical hand!
Book learning and books would be banished the land.

If art critics as a class were the most conservative in their estimates of his ability, it was one of the most eminent, John Ruskin, whose praise went to most extravagant lengths. Bewick, he asserted, as late as 1890,[2] " ... without training, was Holbein's equal ... in this frame are set together a drawing by Hans Holbein, and one by Thomas Bewick. I know which is most scholarly; but I do not know which is best." Linking Bewick with Botticelli as a draughtsman, he added:[3] "I know no drawing so subtle as Bewick's since the fifteenth century, except Holbein's and Turner's." And as a typical example of popular appreciation, the following, from the June 1828 issue [Pg 187]of Blackwood's Magazine, appearing a few months before Bewick's death, should suffice:

Have we forgotten, in our hurried and imperfect enumeration of wise worthies,—have we forgotten "The Genius that dwells on the banks of the Tyne," the matchless, Inimitable Bewick? No. His books lie in our parlour, dining-room, drawing-room, study-table, and are never out of place or time. Happy old man! The delight of childhood, manhood, decaying age!—A moral in every tail-piece—a sermon in every vignette.

This acclaim came to Bewick not only because his subjects had a homely honesty, but also, although not generally taken into account, because of the brilliance and clarity with which they were printed. Compared with the wood engravings of his predecessors, his were more detailed and resonant in black and white, and accordingly seemed miraculous and unprecedented. He could engrave finer lines and achieve better impressions in the press because of improvements in technology which will be discussed later, but for a century the convincing qualities of this new technique in combination with his subject matter led admirers to believe that he was an artist of great stature.

Later, more mature judgment has made it plain that his contributions as a craftsman outrank his worth as an artist. He was no Holbein, no Botticelli—it is absurd to think of him in such terms—but he did develop a fresh method of handling wood engraving. Because of this he represents a turning point in the development of this medium which led to its rise as the great popular vehicle for illustration in the 19th century. In his hands wood engraving underwent a special transformation; it became a means for rendering textures and tonal values. Earlier work on wood could not do this; it could manage only a rudimentary suggestion of tones. The refinements that followed, noticeable in the highly finished products of the later 19th century, came as a direct and natural consequence of Bewick's contributions to the art.

Linton[4] and a few others object to the general claim that Bewick was the reviver or founder of modern wood engraving, not only because the art was practiced earlier, if almost anonymously, and had never really died out, but also because his bold cuts had little in common with their technician's concern with infinite manipulation of surface tones, a feature of later work. But this misses the main point—that Bewick had taken the first actual steps in the new direction.

Figure 1.—Woodcutting Procedure, showing method of cutting with the knife on the plank grain, from Jean Papillon's Traité de la gravure en bois, 1766.

Unquestionably he gave the medium a new purpose, even though it was not generally adopted until after 1830. Through his pupils, his unrelenting industry, and his enormous influence he fathered a pictorial activity that brought a vastly increased quantity of illustrations to the public. Periodical literature, spurred by accompanying pictures that could be cheaply made, quickly printed, and dramatically pointed, became a livelier force in education. Textbooks,[Pg 188] trade journals, dictionaries, and other publications could more effectively teach or describe; scientific journals could include in the body of text neat and accurate pictures to enliven the pages and illustrate the equipment and procedures described. Articles on travel could now have convincingly realistic renditions of architectural landmarks and of foreign sights, customs, personages, and views. The wood engraving, in short, made possible the modern illustrated publication because, unlike copper plate engraving or etching, it could be quickly set up with printed matter. Its use, therefore, multiplied increasingly until just before 1900, when it was superseded for these purposes by the photomechanical halftone.

But while Bewick was the prime mover in this revolutionary change, little attention has been given to the important technological development that cleared the way for him. Without it he could not have emerged so startlingly; without it there would have been no modern wood engraving. It is not captious to point out the purely industrial basis for his coming to prominence. Even had he been a greater artist, a study of the technical means at hand would have validity in showing the interrelation of industry and art although, of course, the aesthetic contribution would stand by itself.

But in Bewick's case the aesthetic level is not particularly high. Good as his art was, it wore an everyday aspect: he did not give it that additional expressive turn found in the work of greater artists. It should not be surprising, then, that his work was not inimitable. It is well-known that his pupils made many of the cuts attributed to him, making the original drawings and engraving in his style so well that the results form almost one indistinguishable body of work. The pupils were competent but not gifted, yet they could turn out wood engravings not inferior to Bewick's own. And so we find that such capable technicians as Nesbit, Clennell, Robinson, Hole, the Johnsons, Harvey, and others all contributed to the Bewick cult.

Linton, who worshipped him as an artist but found him primitive as a technician, commented:[5] "Widely praised by a crowd of unknowing connoisseurs and undiscriminating collectors, we have yet, half a century after his death, to point out how much of what is attributed to him is really by his hand.

Chatto,[6] who obtained his information from at least one Bewick pupil, says that many of the best tailpieces in the History of British birds were drawn by Robert Johnson, and that "the greater number of those contained in the second volume were engraved by Clennell." Granted that the outlook and the engraving style were Bewick's, and that these were notable contributions, the fact that the results were so close to his own points more to an effective method of illustration than to the outpourings of genius.

Low Status of the Woodcut

Bewick's training could not have been less promising. Apprenticed to Ralph Beilby at the age of fourteen, he says of his master:[7]

... The work-place was filled with the coarsest kind of steel-stamps, pipe moulds, bottle moulds, brass clock faces, door plates, coffin plates, bookbinders letters and stamps, steel, silver and gold seals, mourning rings, &c. He also undertook the engraving of arms, crests and cyphers, on silver, and every kind of job from the silversmiths; also engraving bills of exchange, bank notes, invoices, account heads, and cards.... The higher department of engraving, such as landscapes or historical plates, I dare say, was hardly thought of by my master....

A little engraving on wood was also done, but Bewick tells us that his master was uncomfortable in this field and almost always turned it over to him. His training, obviously, was of a rough and ready sort, based upon serviceable but routine engraving on metal. There was no study of drawing, composition, or any of the refinements that could be learned from a master who had a knowledge of art. Whatever Bewick had of the finer points of drawing and design he must have picked up by himself.

When he completed his apprenticeship in 1774 at the age of twenty-one, the art of engraving and cutting on wood was just beginning to show signs of life after more than a century and a half of occupying the lowest position in the graphic arts. Since it could not produce a full gamut of tones in the gray register, which could be managed brilliantly by the copper plate media—line engraving, etching, mezzotint and aquatint—it was confined to ruder and less exacting uses, such as ornamental headbands and tailpieces for printers and as illustrations for cheap popular broadsides. When good illustrations[Pg 189] were needed in books and periodicals, copper plate work was almost invariably used, despite the fact that it was more costly, was much slower in execution and printing, and had to be bound in with text in a separate operation. But while the Society of Arts had begun to offer prizes for engraving or cutting on wood (Bewick received such a prize in 1775) the medium was still moribund. Dobson[8] described its status as follows:

During the earlier part of the eighteenth century engraving on wood can scarcely be said to have flourished in England. It existed—so much may be admitted—but it existed without recognition or importance. In the useful little État des Arts en Angleterre, published in 1755 by Roquet the enameller,—a treatise so catholic in its scope that it included both cookery and medicine,—there is no reference to the art of wood-engraving. In the Artist's Assistant, to take another book which might be expected to afford some information, even in the fifth edition of 1788, the subject finds no record, even though engraving on metal, etching, mezzotinto-scraping—to say nothing of "painting on silks, sattins, etc." are treated with sufficient detail. Turning from these authorities to the actual woodcuts of the period, it must be admitted that the survey is not encouraging.

Figure 2.—Wood Engraving Procedure, showing manipulation of the burin, from Chatto and Jackson, A treatise on wood engraving, 1861. (See footnote 6.)

Earlier, among other critics of the deficiencies of the woodcut, Horace Walpole[9] had remarked:

I have said, and for two reasons, shall say little of wooden cuts; that art never was executed with any perfection in England; engraving on metal was a final improvement of the art, and supplied the defects of cuttings in wood. The ancient wooden cuts were certainly carried to a great heighth, but that was the merit of the masters, not of the method.

Woodcut and Wood Engraving

It is necessary, before continuing, to distinguish clearly between the woodcut and the wood engraving, not only because early writers used these terms interchangeably, but also to determine exactly what Bewick contributed technically. The woodcut began with a drawing in pen-and-ink on the plank surface of a smooth-grained wood such as pear, serviceberry, or box. The woodcutter, using knife, gouges, and chisels, then lowered the wood surrounding the lines to allow the original drawing, unaltered, to be isolated in relief (see fig. 1). Thus the block, when inked and printed, produced facsimile impressions of the drawing in black lines on white paper. Usually an accomplished artist made the drawing, whereas only a skilled craftsman was needed to do the cutting; very few cutters were also capable of making their own drawings.

The wood engraving, on the other hand, started with a section of dense wood of a uniform texture, usually box or maple, and with the end-grain rather than the plank as surface. For larger engravings a number of sections were mortised together. The drawing was made on the block, not in pen-and-ink although this could be done (certain types of wood engraving reproduced pen drawings) but in gray washes with a full range of tones. The engraver, using a burin similar to that employed in copper plate work, then ploughed[Pg 190] out wood in delicate ribbons (see fig. 2). Since the surface was to receive ink, the procedure moved from black to white: the more lines taken away, the lighter the tones would appear, and, conversely, where fewest or finest lines were removed the tones would be the darkest. In the finished print the unworked surface printed black while each of the engraved lines showed as white. It was the "white line" that gave wood engraving its special quality. On the smoother end-grain it could be manipulated with extreme fineness, an impossibility with the plank side, which would tear slightly or "feather" when the burin was moved across the grain. Tones and textures approaching the scale of copper plate engraving could be created, except, of course, that the lines were white and the impressions not so brilliant. But since grays were achieved by the visual synthesis of black ink and white paper, it mattered little whether the engraved lines were black or white so long as the desired tones could be produced.

Figure 3.—Late 15th-Century White-Line Engraving "The crowning of the Virgin," in the "dotted manner" executed on metal for relief printing. Parts were hand colored.

For purposes of realism, this was an enormous improvement over the old black-line woodcut. Natural tones and textures could be imitated. The engraver was no longer a mere mechanical craftsman cutting around existing lines; special skill was needed to translate tones in terms of white lines of varying thickness and spacing. The opportunity also existed for each engraver to work his own tones in his own manner, to develop a personal system. In short, the medium served the same purpose as copper plate line engraving, with the added virtue that it could be printed together with type in one impression. If it failed artistically to measure up to line engraving or to plank woodcut, this was not the fault of the process but of the popular reproductive ends which it almost invariably served.

Actually, white-line engraving for relief printing dates from the 15th century. The most conspicuous early examples are the so-called "dotted prints" or "gravures en manière criblée," in which the designs were brought out by dots punched in the plates, and by occasional engraved lines (see fig. 3). Until Koehler's[10] study made this fact plain, 19th-century critics could hardly believe that these were merely white-line metal relief prints, inked on the surface like woodcuts. But a number of other examples of the same period exist which were also made directly on copper or type metal—the method, although rudimentary, being similar in intent to 19th-century wood engraving. One of these examples (fig. 4), in the collection of the U. S. National Museum, is typical. This was not simply an ordinary line engraving printed in relief rather than in the usual way; the management of the lights shows that it was planned as a white-line engraving. The reason for this treatment, obviously, was to permit the picture and the type to be printed in one operation.

The well-known wood engravings of soldiers with standards, executed by Urs Graf in the early 1500's, are probably the only white-line prints in this medium by an accomplished artist until the 18th century. But these are mainly in outline, with little attempt to achieve tones. No advantage was gained by having the lines white rather than black other than an engaging roughness in spots: the prints were simply whimsical excursions by an inventive artist.

[Pg 191]

Figure 4.—White-Line Engraving on Metal for Relief Printing, "The Franciscan, Pelbart of Temesvar, Studying in a Garden," from "Pomerium quadragesimale, fratris Pelbarti ordinis sancti Francisci," Augsburg, 1502.

[Pg 192]

Relief engraving on type metal and end-grain wood really got under way as a consistent process in England at the beginning of the 18th century. Chatto[11] gives this date as conjecture, without actual evidence, but a first-hand account can be found in the rare and little-known book, published in 1752, in which the combination of anonymous authorship and a misleading title obscured the fact that it is a digest of John Baptist Jackson's manuscript journal. This eminent woodcutter, who was born about 1700 and worked in England during the early years of the century, must be considered an important and reliable witness. The unknown editor paraphrases Jackson on the subject of engraving for relief purposes:[12]

... I shall give a brief Account of the State of Cutting on Wood in England for the Type Press before he [Jackson] went to France in 1725. In the beginning of this Century a remarkable Blow was given to all Cutters on Wood, by an Invention of engraving on the same sort of Metal which Types are cast with. The celebrated Mr. Kirkhal, an able Engraver on Copper, is said to be the first who performed a Relievo Work to answer the use of Cutting on Wood. This could be dispatched much sooner, and consequently answered the purpose of Booksellers and Printers, who purchased those sort of Works at a much chaper [sic] Rate than could be expected from an Engraver on Wood; it required much more Time to execute with accuracy any piece of Work of the same Measure with those carved on Metal. This performance was very much in Vogue, and continued down to this Day, to serve for Initials, Fregii and Finali; it is called a clear Impression, but often gray and hazy, far from coming up to that clear black Impression produced with cutting on the side of a piece of Box-wood or Pear-tree. Much about the same time there started another Method of Engraving on the end ways of Wood itself, which was cut to the height of the Letters to accompany them in the Press, and engraved in the same Manner as the Metal Performance; this Method was also encouraged, and is the only way of Engraving on Wood at present used in the English Printing-houses. These performances are to be seen in Magazines, News Papers, &c. and are the Remains of the ancient Manner of Cutting on Wood, and is the reason why the Curious concluded it was intirely lost.

This is important evidence that end-grain wood engraving was not only known in England in the early 18th century but was actually the prevailing style. In that country, where a woodcut tradition did not exist, the new method gained its first foothold. But it was not yet conceived in terms of white lines; it was merely a cheaper substitute for cutting with the knife on the plank. In European countries with long art and printing traditions, this substitute method was considered beneath contempt. Jackson[13] describes the aversion of French woodcutters for the newer and cheaper process:

From this Account it is evident that there was little encouragement to be hoped for in England to a Person whose Genius led him to prosecute his Studies in the ancient Manner; which obliged Mr. Jackson to go over to the Continent, and see what was used in the Parisian Printing-houses. At his arrival there he found the French engravers on Wood all working in the old Manner; no Metal engravers, or any of the same performance on the end of the Wood, was ever used or countenanced by the Printers or Booksellers in that City.

Figure 5.—Example of the Woodcut Style that Created Facsimile Drawings. Woodcut (actual size) by Hans Lutzelburger, after a drawing by Holbein for his "Dance of Death," 1538.

There were good reasons for the lack of development of a white-line style, even in England with its lower standards in printing and illustrative techniques. On the coarse paper of the period fine white lines could not be adapted to relief (typographical) presswork; they would be lost in printing because the ribbed paper received ink unevenly. Even the simple black[Pg 193] lines of the traditional woodcut usually printed spottily when combined with type. The white lines, then, had to be broadly separated. This did not permit the engraving of delicate tones. If this could not be achieved, the effect was similar to woodcutting but with less crispness and accuracy in the drawing. A good woodcut in the old manner could do everything the wood engraving could do, before Bewick, with the added virtue that the black line was comparatively clear and unequivocal, as can be seen in figure 5.

Figure 6.—Woodcut Tailpiece by J. M. Papillon, from Traité historique et pratique de la gravure en bois, 1766. The cutting was done so minutely that some details were lost in printing. (Actual size.)

The woodcut, in the hands of a remarkable cutter, could produce miracles of delicacy. It could, in fact, have black lines so fine and so closely spaced as to take on the character of line engraving. It did not, of course, have the range of tones or the delicacy of modeling possible in the copper plate medium, where every little trench cut by the burin would hold ink BELOW the wiped-off surface, to be transferred to dampened paper under the heavy pressure of the cylinder press. In addition, the roughness of early paper, which was serious for the woodcut, created no difficulties for the line engraver or for other workers in the intaglio or gravure media.

But the influence of copper plate work was strong, and some skillful but misguided woodcut craftsmen tried to obtain some degree of its richness. French artists from about 1720, notably Jean M. Papillon, produced cuts so delicate that their printing became a problem (see fig. 6). Jackson, who had worked with the French artist in Paris, condemned his efforts to turn the woodcut into a tonal medium through the creation of numerous delicate lines because such effects were impossible to print. Jackson[14] is quoted in the Enquiry:

In 1728 Mr. Pappillon began his small Paris Almanack, wherein is placed Cuts (done on Wood) allusive to each Month, with the Signs of the Zodiack, in such a Minute Stile, that he seems to forget in that Work the Impossibility of printing it in a Press with any Clearness ... But alas! His father and M. le Seur [also woodcutters] had examined Impression and its Process, and saw how careful the Ancients were to keep a proper Distance between their Lines and hatched Works, so as to produce a clean Impression ... I saw the Almanack in a horrid Condition before I left Paris, the Signs of the Zodiack wore like a Blotch, notwithstanding the utmost Care and Diligence the Printer used to take up very little Ink to keep them clean.

It is clear that too thin a strip of white between black lines was not suitable for printing in the first half of the 18th century. But when Bewick's cuts after 1790 are examined we can see many white lines thinner than a hair. Obviously something had happened to permit him a flexibility not granted to earlier workers on wood. Bewick's whole craft depended upon his ability to control white lines of varying thickness. Why was he able to do this, and why could it be done without trouble by others after him?

Early paper, as already mentioned, had a ribbed grain because it was made on a hand mould in which wires were closely laid in one direction, but with enough space between to allow the water in the paper pulp to drain through. Crossing wires, set some distance apart, held them together. Each wire, however, made a slight impression in the finished paper, the result being a surface with minute ripples. The surface of this laid paper presented irregularities even after the glazing operation, done with hammers before about 1720 and with wooden rollers up to about 1825.[15]

In 1756 James Whatman began to manufacture a new, smooth paper to replace the laid variety that had been used since the importation of paper into Europe in the 12th century. Whether Whatman or the renowned printer John Baskerville was the guiding spirit in this development is uncertain.[16] Baskerville,[Pg 194] who had been experimenting with type faces of a lighter and more delicate design, had been dissatisfied with the uneven surface of laid paper. Possibly he saw examples of the Chinese wallpaper on wove stock, made from a cloth mesh, which was a staple of the trade with the Orient. Hunter[17] describes the new mould:

The wove covering was made of fine brass screening and received its name because it was woven on a loom in about the same manner as cloth. It left in the paper an indistinct impression resembling a fabric. Baskerville had been in the japanning and metal-working trades before becoming a printer, so that he was naturally familiar with this material, metal screening having been used in England for other purposes before it was put to use as a material upon which to mould sheets of paper.

The first book printed in Europe on wove paper unquestionably was the Latin edition of Virgil produced by Baskerville in 1757. This was, however, partly on laid also. The actual paper was made in James Whatman's mill in Maidstone, Kent, on the banks of the river Len, where paper had been made since the 17th century. Whatman, who became sole owner of the mill in 1740, specialized in fine white paper of the highest quality. But while the book attracted considerable attention it did not immediately divert the demand for laid paper, since it was looked on more as an oddity than as a serious achievement. Baskerville was strictly an artist: he took unlimited time and pains, he had no regard for the prevailing market, and he produced sporadically; also, he was harshly criticized and even derided for his strange formats.[18] With such a reputation for impracticality the printer's influence was negligible during his lifetime although, of course, it was widely felt later.

About 1777 the French became acquainted with wove paper, which Franklin brought to Paris for exhibition. In 1779, according to Hunter,[19] M. Didot the famous printer, "having seen the papier vélin that Baskerville used, addressed a letter to M. Johannot of Annonay, a skilled papermaker, asking him to endeavour to duplicate the smooth and even surface of this new paper. Johannot was successful in his experiments, and for his work in this field he was in 1781 awarded a gold medal by Louis XVI."

Figure 7.—Wood Engraving by Thomas Bewick, "The Man and the Flea," for Fables, by the late Mr. Gay, 1779. (Actual size.) Note how the closely worked lines of the sky and water have blurred in printing on laid paper. The pale vertical streak is caused by the laid mould.

Wove paper was so slow to come into use that Jenkins gives the date 1788 for its first appearance in book printing.[20] While he missed a few examples, notably by Baskerville, it is certain that few books with wove paper were published before 1790. But after that date its manufacture increased with such rapidity that by 1805 it had supplanted laid paper for many printing purposes.

The reasons for this gap between the introduction and the acceptance of the new paper are not clear; the inertia of tradition as well as the probable higher cost no doubt played a part, and we may assume that early wove paper had imperfections and other drawbacks serious enough to cause printers to prefer the older material.

Bewick's early work was printed on laid paper. Up to 1784 he had worked in a desultory fashion on wood, much of his time being occupied with seal cutting because there was still no real demand for wood engraving. In Gay's Fables, published in 1779, the cuts printed so poorly on the laid paper (see fig. 7) that Dobson[21] was moved to say:

Generally speaking, the printing of all these cuts, even in the earlier editions (and it is absolutely useless to consult[Pg 195] any others), is weak and unskillful. The fine work of the backgrounds is seldom made out, and the whole impression is blurred and unequal.

Figure 8.—"The Spanish Pointer", illustration (actual size) by Thomas Bewick, from A general history of quadrupeds, 1790, in the collections of the Library of Congress.

Even in the Select fables of Aesop and others of 1784, when Bewick's special gifts began to emerge, the cuts on laid paper appeared weak in comparison with his later work. Bewick was still using wood engraving as a cheaper, more quickly executed substitute for the woodcut. The designs were based upon Croxall's edition of Aesop's Fables, published in 1722, which was probably the best and most popular illustrated book published in England during the century up to Bewick's time. According to Chatto, the cuts were made with the burin on end-grain wood, probably by Kirkall,[22] but Bewick believed they were engraved on type metal.[23] It was not easy to tell the difference. Type metal usually made grayer impressions than wood and sometimes, but not always, nail-head marks appeared where the metal was fastened to the wood base. The Croxall cuts, in turn, were adapted with little change from 17th-century sources—etchings by Francis Barlow and line engravings by Sebastian Le Clerc. Bewick's cuts repeated the earlier designs but changed the locale to the English countryside of the late 18th century. This was to be expected; to have a contemporary meaning the actors of the old morality play had to appear in modern dress and with up-to-date scenery. But technically the cuts followed the pattern of Croxall's wood engraver, although with a slightly greater range of tone. Artistically Bewick's interpretation was inferior because it was more literal; it lacked the grander feeling of the earlier work.

Bewick really became the prophet of a new pictorial style in his A general history of quadrupeds, published in 1790 on wove paper (see figs. 8, 9, and 10). Here his animals and little vignetted tailpieces of observations in the country announced an original subject for illustration and a fresh treatment of wood engraving, although some designs were still copied from earlier models. The white line begins to function with greater elasticity; tones and details beyond anything known previously in the medium appear with the force of innovation. The paper was still somewhat coarse and the cuts were often gray and muddy. But the audacity of the artist in venturing tonal subtleties was immediately apparent.

One of Bewick's old friends at Newcastle had been William Bulmer, who by the 1790's had become a famous printer. In 1795 he published an edition of Poems by Goldsmith and Parnell, which was preceded by an Advertisement announcing his intentions:

The present volume ... [is] particularly meant to combine the various beauties of PRINTING, TYPE-FOUNDING, ENGRAVING, and PAPER-MAKING.... The ornaments are all engraved on blocks of wood, by two of my earliest acquaintances, Messrs. Bewick [Thomas and his brother and apprentice John], of Newcastle upon Tyne and London, after designs made from the most interesting passages of the Poems they embellish. They have been executed with great care, and I may venture to say, without being supposed to be influenced by ancient friendship, that they form the most extraordinary effort of the art of engraving upon wood that ever was produced in any age, or any country. Indeed it seems almost impossible that such delicate effects could be obtained from blocks of wood. Of the Paper, it is only necessary to say that it comes from the manufactory of Mr. Whatman.

The following year, 1796, a companion volume, The Chase, a Poem, by William Somervile, appeared with cuts by Bewick after drawings by his brother John (see fig. 11). In both books, although no acknowledgment was given, there was considerable assistance[Pg 196] from pupils Robert and John Johnson and Charlton Nesbit, as well as from an artist associate Richard Westall.[24] Bulmer was quite conscious that a new era in printing and illustration had begun. Updike[25] notes Bulmer's recognition of the achievements of both Baskerville and Bewick in giving the art of printing a new basis:

To understand the causes of the revival of English printing which marked the last years of the century, we must remember that by 1775 Baskerville was dead.... There seems to have been a temporary lull in English fine printing and the kind of type-founding that contributed to it. The wood-engraving of Thomas Bewick, produced about 1780, called, nevertheless, for more brilliant and delicate letter-press than either Caslon's or Wilson's types could supply. If Baskerville's fonts had been available, no doubt they would have served.... So the next experiments in typography were made by a little coterie composed of the Boydells, the Nicols, the Bewicks (Thomas and John), and Bulmer.

Figure 9.—Tailpiece by Thomas Bewick (actual size), from A general history of quadrupeds, 1790, in the collections of the Library of Congress.

When the cuts in this book are compared with earlier impressions from wood blocks, the difference is quickly seen. The blocks are more highly wrought, yet every line is crisp and clear and the impressions are black and brilliant. When we realize that the only new technological factor of any consequence was the use of good smooth wove paper, we can appreciate its significance.

There were no other developments of note in the practice of printing during the 18th century. The old wooden hand press, unimproved except for minor devices, was still in universal use. Ink was little improved; paper was handmade; type was made from hand moulds. The ink was still applied by dabbing with inking balls of wool-stuffed leather nailed to wooden forms. The leather was still kept soft by removing it and soaking it in urine, after which it was trampled for some time to complete the unsavory operation. Paper still had to be dampened overnight before printing, and freshly inked sheets were still hung to dry over cords stretched across the room.

But with a more sympathetic surface for receiving ink from relief blocks, a new avenue for wood engraving was now open. In the following year, 1797, the first volume of Bewick's finest and best-known work was published. This was the History of British birds, for which he and his pupils did the cuts while Ralph Beilby, his partner and former master, provided the descriptions (see figs. 12, 13, and 14.) It achieved an immense and instantaneous popularity that carried the artist's name over the British Isles. The attractiveness of the subject, the freshness of the medium—which could render the softness of feathers and could be interspersed with text—the powerful and decorative little tail pieces, and the comparative inexpensiveness of the volumes, brought the Birds into homes everywhere.

Figure 10.—Tailpiece by Thomas Bewick (actual size), from A general history of quadrupeds, 1790, in the collections of the Library of Congress.

Actually, wood engraving was not immediately adopted on a wide scale. Having done without it for so long, printers and publishers made no concerted rush to avail themselves of the new type of cuts. Bewick's pupils found little of this kind of work to do before about 1830. Luke Clennell dropped engraving for painting; William Harvey restricted himself to drawing and designing; Charlton Nesbit[Pg 197] and John Jackson remained engravers, as did a host of lesser individuals. Dobson says:[26]

The pupils who quitted him to seek their fortunes in London either made their way with difficulty, or turned to other pursuits, and the real popularization of wood-engraving did not take place until some years after his death.

One reason for delay in adopting the new technique may have been the danger of the block splitting, or of the sections of wood coming apart at the mortise-joints during the printing operation. If this happened, work had to be suspended until a new block was engraved, or until the sections were reglued. For periodicals with deadlines, this was a serious hazard.

Wood Engraving and the Stereotype

In any event, wood engraving did not really flourish until a practical stereotyping process was perfected. By this procedure substitute blocks of type metal could replace the wood engravings in the press, and the danger of splitting the block was eliminated. The first steps of any importance toward a practical process were made by the Earl of Stanhope around 1800, but not until Claude Genoux in France, between 1828 and 1829, developed the papier mâché or wet mat process could acceptable stereotypes of entire pages be produced.[27] By this method, patented on July 24, 1829, and others that followed, a number of duplicate plates of each page could be made as required for rapid printing on a battery of presses. Wood engraving now emerged as a practical method of illustration for popular publications. The Penny Magazine and the Saturday Magazine, founded in 1832, immediately made use of Genoux's stereotyping process. Dobson[28] describes the effect of these periodicals:

"The art of wood engraving received an astonishing impact from these publications. The engraver, instead of working merely with his own hands, has been obliged to take five or six pupils to get through the work." (Mr. Cowper's evidence before the Select Committee on Arts and Manufactures, 1835). It is difficult nowadays [1884] to understand what a revelation these two periodicals, with their representations of far countries and foreign animals, of masterpieces of painting and sculpture, were to middle-class households fifty years ago.

Figure 11.—Tailpiece by Thomas Bewick (actual size), engraved after a drawing by John Bewick, from The Chase, by William Somervile, 1796. (Photo courtesy the Library of Congress.)

We will not pursue Bewick's career further. With habits of hard work deeply ingrained, he kept at his bench until his death in 1828, engraving an awesome quantity of cuts. But he never surpassed his work on the Birds, although his reputation grew in proportion to the spread of wood engraving throughout the world.

The medium became more and more detailed, and eventually rivaled photography in its minute variations of tone (see figs. 15 and 16). But printing wood engravings never was a problem again. Not only was wove paper always used in this connection, but it had become much cheaper through the invention of a machine for producing it in lengths. Nicholas Louis Robert, in France, had developed and exhibited such an apparatus in 1797, at the instigation of M. Didot. John Gamble in England, working with Henry and Charles Fourdrinier, engaged a fine mechanic, Bryan Donkin, to build a machine on improved principles. The first comparatively successful one was completed in 1803. It was periodically improved, and wove paper appeared in increasing quantities. Spicer[29] says: "Naturally these improvements and economies in the manufacture of paper were accompanied by a corresponding increase in output. Where, in 1806, a machine was capable of making 6 cwt. in twelve hours, in 1813 it could turn out double that quantity in the same time at one quarter the expense."

[Pg 198]

Figure 12.—Wood Engraving by W. J. Linton, 1878 (Actual Size). The detail opposite is enlarged four times to show white line-technique.

[Pg 199]

[Pg 200]

Figure 13.—"Pintail Duck" by Thomas Bewick (actual size), from History of British birds, vol. 2, 1804. The detail opposite is enlarged three times.

At about the same time the all-iron Stanhope press began to be manufactured in quantity, and shortly the new inking roller invented by the indispensable Earl came into use to supplant the old inking balls. Later in the century (there is no need to go into specific detail here) calendered and coated papers were introduced, and wood engraving on these glossy papers became a medium that could reproduce wash drawings, crayon drawings, pencil drawings, and oil paintings so faithfully that all the original textures were apparent.[30] The engraver, concerned entirely with accurate reproduction, became little more than a mechanic who rendered pictures drawn on the blocks by an artist. In time, photographic processes came to be used for transferring pictures to the blocks and eventually, of course, photomechanical halftones replaced the wood engraver altogether.

Figure 14.—Title-Page Illustration by Thomas Bewick, from History of British birds, vol. 1, 1797. (Actual size.)

Bewick was an artist, not a reproductive craftsman. His blocks were conceived as original engravings, not as imitations of tones and textures created in another medium. If wood engraving advanced in the direction of commercialism to fill an overwhelming mass need, it was only because he had given it a technical basis. But it had greater artistic potentialities, as proved by Blake, Calvert, and Lepére, among others, and has found new life in the engravers of the 20th-century revival.

The reasons for Bewick's remarkable effectiveness can now be summed up. He succeeded, first, because he was the natural inheritor of a specifically English graphic arts process, burin-engraving on the end grain of wood. This had been practiced almost solely in England, which lacked a woodcut tradition, for about 75 years before the date he finished his apprenticeship. We know from Jackson's contemporary account that end-grain wood engraving was standard practice in England from about 1700. Bewick merely continued and refined a medium that came down to him as a national tradition.

Secondly, his country isolation and lack of academic training saved him from the inanity of repeating the old decorative devices—trophies, cartouches, classical figures, Roman ruins, and other international conventions that had lost their significance by the 1780's, although a spurious classicism was still kept alive for genteel consumption and the romantic picturesque still persisted in interior decoration.[Pg 201]

Thirdly, he looked at life and nature with a fresh eye, without preconceptions. While his lack of larger vision held him down as an artist, it contributed to his feeling for natural textures and story-telling detail. His approach to illustration, therefore, was the spontaneous expression of an observant but unimaginative nature, coated with a bitter-sweet sentiment. It was this quality, so homely and common and yet so charged with integrity, that delivered the shock of recognition to a mass audience.

Lastly, and perhaps most importantly in the long run, he was fortunate enough to live at a time when a necessary prerequisite for the physical appearance of his work, wove paper, was coming into use. Without it he would soon have had to simplify his line system, returning to older and less detailed methods, or his work would have remained unprintable. It was the new paper that allowed him to extract unprecedented subtleties from the wood block, that made his cuts print clearly and evenly, and that encouraged the expansion of the wood engraving process. These factors, taken together, make up the phenomenon of Thomas Bewick.

Figure 15.—Tailpiece by Thomas Bewick, from History of British birds, vol. 2, 1804. (Actual size.)

U. S. GOVERNMENT PRINTING OFFICE: 1959